Description
Details
NOTE: This 12VDC to 120VAC inverter is recommended for use with: 9120RM, W219C, Q30, Q36A, W232, W233A, W233D, W288E, W220, W333L, & W388AC Machines
NOTE: The following machines require a 2,000 Watt Inverter THMS-2000: 1200CMB, 1200CMBX, 1233SMSB, & W100A2 Machines
THMS1000
- Full Output Power: 1000 Watts
- High Surge
- High Speed Low Noise Cooling Fan
- Ground Fault Sensing
- New Hard Wire Block
Specifications:
- Continuous output power: 1000 Watts
- Surge power capability (peak power): 2000 Watts
- DC input / operating voltage: 10.5 to 17 Volts
- Output voltage: 120 Volts ac / Output frequency: 60 Hz / Output wave form: modified sine wave
- Battery low voltage shutdown: 10.5 +/- 0.5 Volts High input voltage protection: 15V
- No load current: < 0.8 Amps
- Full load efficiency: >85%
- AC Output Socket Type: 4, Type 2 -3 prong
- Fuse protection
Electronic Circuit Protection:
- Overload Protection – Inverter will automatically shut down if load exceeds inverter rating.
- Smart Surge Control – Inverter will attempt to start loads above the continuous rating for up to 10 seconds.
- Voltage Protection – Whenever the input exceeds 17 volts DC or is less than 9.5 volts, the inverter will automatically shutdown.
- Short Circuit Protection – Automatically shuts down until short circuit is removed.
- Thermal Cutoff – Automatically shuts down if internal temperature exceeds safe design parameters.
Product Summary:
- Dimensions (W/ H/ D): 12in. x 6.06in. X10.2in.
- Product Gross Weight: 5.5lbs
- Product Net Weight: .5.25lbs
1-Year Mfg. Warranty
This Thor 1000-Watt power inverter model, THMS-1000 replaces the discontinued TH-1000 model.
Wiring Recommendation:
Feet from Battery - Gauge of Wire Needed
4ft - 6 gauge
6ft - 4 gauge
8ft - 4 gauge
10ft - 2 gauge
12ft - 2 gauge
14ft - 0 gauge
16ft - 0 gauge
18th - 1/0 gauge
20th - 1/0 gauge
22ft - 2/0 gauge
24ft - 2/0 gauge
26ft - 2/0 gauge
Additional Info
Additional Info
Part Number | THMS-1000 |
---|