Before the Blitz™ it had never been so easy to cut keys by code. No more fumbling around with time consuming depth keys. No more confusing micrometer measurements and complicated machine set-up. The "key" to this revolution was translating the lock manufacturers' depth and space measurements to code cards.Most often, just replacing the code card is all that is required to cut a key for a different lock.
Simply insert the code card for the lock you are using and set the space needle to the number 1 mark on the card. Then turn the depth crank until the depth needle reaches the appropriate depth number. This action will move the blank into the cutter and make a cut to the proper depth. Next, back the key off of the cutter and move the space needle to the second space. Continue this simple procedure to cut a new key (to the manufacturer's exact specifications) in less than one minute.
The high-performance, long-life motor on the Blitz™ provides ample torque for cutting a high volume of keys. It is available in 120VAC or 240VAC for use in locksmith shops around the world and in AC/DC (120VAC and 12VDC) for use in vans and trucks, as well as your shop.
The Original Blitz™ Machine has a 1-YEAR-WARRANTY.
- An expanded deck of 175 code cards, including 8 micrometer cards
- Tubular Key Adapter Kit (TKA-CMB)
- Blitz Calibration Kit (CMB-CK)
- CW-14MC (100º large cylinder) cutter
- CW-1011 (90º small cylinder) cutter
- CW-47MC (87º automotive) cutter
- Binder (holds 150 cards) with Manual
- Horseshoe tip stop
- Red tip stop
- Brass plated key shim
- Cutter adjustment wrench
- 5/64" allen wrench
- Cutter nut wrench
|Free Gift with the Extreme Blitz™|
Receive ALL of these FREE GIFTS* by registering your new Extreme Blitz™
|*Your free gifts will be sent directly to you upon receipt of your registration card. Free gift choices may be subject to change.|