The Blitz Code Milling Machine

Before the Blitz™ it had never been so easy to cut keys by code. No more fumbling around with time consuming depth keys. No more confusing micrometer measurements and complicated machine set-up. The "key" to this revolution was translating the lock manufacturers' depth and space measurements to code cards. Most often, just replacing the code card is all that is required to cut a key for a different lock.

Simply insert the code card for the lock you are using and set the space needle to the number 1 mark on the card. Then turn the depth crank until the depth needle reaches the appropriate depth number. This action will move the blank into the cutter and make a cut to the proper depth. Next, back the key off of the cutter and move the space needle to the second space. Continue this simple procedure to cut a new key (to the manufacturer's exact specifications) in less than one minute.

The high-performance, long-life motor on the Blitz™ provides ample torque for cutting a high volume of keys. It is available in 120VAC or 240VAC for use in locksmith shops around the world and in AC/DC (120VAC and 12VDC) for use in vans and trucks, as well as your shop.